|
| |
| TSi
Power's Flexible Series UPS is an excellent choice for those
applications that require battery backup with good surge protection, as
well as need
the flexibility of being able to add additional battery cabinets for
extended run-time as necessary.
Typical
applications
UPs-600
is the ideal UPS for computer or telecommunications equipment in
environments where ac power delivery is unreliable and several hours of
battery backup time are necessary.
Key benefits of
the UPs-600
The
UPs-600 protects connected equipment from: power supply failure,
erroring, system
lockups and re-boots. It contributes to enhanced systems operation,
greater reliability, improved repeatability, and extended operating
life.
Typical back-up time fully loaded is 8 minutes, but 20 minutes can be
obtained when the unit is loaded to 50% of its capacity. Thus, an
application requiring 300VA can be provided with 20 minutes of hold-up. The capability of adding extra EXt-400 external battery packs also
makes this a very cost-effective choice for enabling nearly unlimited
battery backup times. Custom Settings: DIP switches in the rear panel allow the user to set
brownout sensitivity, inverter operating frequency, or alarm mode, for
complete flexibility and control of the UPS.
How the UPs-600
works
Upon loss of power, the audible alarm beeps about once a second, as
the battery inverter kicks in within 8ms, which means equipment will
continue to operate without interruption. When the
battery level drops until only a few minutes of holdup time remain, the
alarm will beep, and the LED will flash more rapidly, alerting of
impending shutdown. A DB-9 female connector provides communications capability with
monitoring software which can safely save open files and automatically
shut down your systems. The
UPs-600 continually provides power protection with a capacitive element
and a fast-acting MOV (metal oxide varistor).
|
| |
Specifications |
UPs-600 |
| |
Electrical |
|
Capacity in VA (watts) |
600
VA (400 watts) |
| |
UPS type |
Single conversion
standby with 4 to 8ms transfer time
|
| |
Input |
| |
Nominal voltage |
120
volts ac, single phase |
| |
Operating voltage / Hz |
95
to 135 volts ac. 47 to 63 Hz, sinusoidal. |
| |
Ac input cord |
6
foot long cord with NEMA 5-15P plug. |
| |
Output |
| |
Nominal voltage |
120
volts ac, single phase, sine wave during normal operation. |
| |
Inverter output |
105
to 130 vacRMS, 50 or 60Hz +/-1%
Pulse-width modulated modified square wave. |
| |
Nominal frequency |
50/60
Hz +/-3 Hz (user-selectable) |
| |
Power efficiency |
98% or higher during ac
operation,
80% or higher during battery inverter operation.
|
| |
Transfer time |
4-
8 ms typical between ac and inverter |
| |
Battery back-up time
(for
more time see below) |
8 minutes @ full load
(400 watts)
20 minutes @ 1/2 load (200 watts)
|
| |
Recharge time |
8
hours to return to 90% capacity after full discharge. |
| |
Optional # EXt-400
extra
battery pack for
longer back-up time
w/Anderson SB50 connector |
A
matching extra battery cabinet with separate charger, supplying
an additional 45 minutes @ full load, 110 minutes @ half load.
With a weight of 35 lbs (15.9kg), and same size as the UPs-600.
EXt-400’s battery recharge time is 12 hours to 90% capacity. |
| |
Surge protection |
MOV
/ spike surge suppression. |
| |
Surge test conditions |
ANSI/IEEE
C62.41-1991 test pulse,
Category A3, ring wave, 6000V, 200A. |
| |
Indicators and alarms |
LED
indicators & audible signals: ac, inverter, and battery status. |
| |
communications interface |
DB-9
female connector provides communications capability
with optional monitoring or automatic shutdown feature.
|
| |
Ac output receptacles |
Two
(NEMA 5-15R) |
| |
Physical |
| |
Dimensions |
125mm(5")wide x
178mm(7")high x 394mm(16")deep
|
| |
Weight |
9.1 kg (22
lbs) |
| |
Safety |
| |
Safety and reliability |
External fuse protects
all ac circuits.
Internal fuses protect all dc circuits.
Durable, all-steel chassis withstands transport in hostile
environments and operation in any indoor application.
|
| |
Environmental |
| |
Ambient temperature |
0º
to +40ºC (32º to +104ºF),
at
10 to 90% relative humidity (non-condensing) |
| |
Warranty |
| |
Warranty |
Two year limited warranty, parts and labor.
One year manufacturer's warranty on batteries. |
|
TSi's ongoing product
improvement process makes specifications subject
to change. Other
companies product names herein are for identification purposes only, and
may be trademarks of their respective companies. |
UPs-600 rear
view (shown without line cord/plug)
UPs-600 system
architecture
TSi Power also manufactures
custom (bespoke in the UK) UPS.
For special OEM/systems integrator applications, please call.
Back to top
|
